Thermaltake Pacific M240 D5 Hard Tube Water Cooling Kit

Rp6.500.000

Description

P/N CL-W216-CU00SW-A
Dimension 518(L) x 198 (W) x 223 (H)
Compatibility Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
(CPU Socket)
Components Dimension Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm
Radiator : 39.9 (H) x 120.7 (W) x 273 (L)
Tube Dimension OD : 16mm , ID : 12mm , L : 500mm
Fan Spec 1500 RPM (1000RPM with LNC)
Coolant Pure Clear Coolant
Kit Contents CPU Water Block
– Pacific W3 CPU Water Block x1

Pump/Reservoir
– Pacific PR15-D5 Pump/Reservoir Combo x1

Radiator
– Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1

Fittings
– Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6
– Pacific G1/4 90 Degree Adapter – Chrome x2

Fan
– Riing 12 LED RGB 3 Pack x1

Coolant
– Thermaltake C1000 Pure Clear Coolant x1

Tube
– V-Tubler PETG Tube 16mm OD 500mm 4Pack x1

Accessory
– Silicone Insert 900mm Tt Premium Edition
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1

* Specifications are subject to change without notice.
* The product picture(s) is only for your reference, it may differ from the actual product.

Caution
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.

 

Additional information

Weight 8 kg

Reviews

There are no reviews yet.

Be the first to review “Thermaltake Pacific M240 D5 Hard Tube Water Cooling Kit”