Specification

• Unique Feature
  Superb Productivity
  – PCIe Gen5 (Graphics, M.2)
  – Eight Channel DDR5
  – USB4 Type-C Ports (40 Gb/s)
  Rock-Solid Durability
  – Ultra Low-Loss PCB
  – 18+3+3 Power Phase, 110A SPS for VCore
  – 20K Long-lasting Black Caps (high quality and conductive polymer capacitors)
  Ultrafast Connectivity
  – Dual Intel^® 10G LAN
  EZ Update
  – ASRock Auto Driver Installer
• CPU
  – Supports AMD Ryzen™ Threadripper™ PRO Processors
  – Supports AMD Socket sTR5
  – Supports ASRock Hyper BCLK Engine
• Chipset
  – AMD WRX90
• Memory
  – Eight Channel DDR5 Memory Technology
  – 8 x DDR5 DIMM Slots*
  – Supports DDR5 ECC, buffered memory (RDIMM/ RDIMM-3DS) up to 7600+(OC)
  – Max. capacity of system memory: 2TB

  *S3 (Sleep) mode is supported only when 1 / 2 / 4 DIMMs memory modules are installed.
• BIOS
  – 256Mb AMI UEFI Legal BIOS with GUI support
• Graphics
  – Aspeed AST2600 BMC Controller
  – 1 x DisplayPort 1.1a with max. resolution up to 1920×1200 @ 60Hz*

  *DisplayPort 1.1a does not support audio function.
• Audio
  – 7.1 CH HD Audio with Content Protection (Realtek ALC1220 Audio Codec)
  – Impedance Sensing on Rear Out port
  – Individual PCB Layers for R/L Audio Channel
  – Nahimic Audio
• LAN
  2 x 10 Gigabit LAN 100/1000/2500/5000/10000 Mb/s (Intel^® X710-AT2)
  – Support PXE 1 x Dedicated IPMI (Realtek RTL8211F)
• Slots
  CPU:
  – 7 x PCIe 5.0 x16 Slots (PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE7 at x16; PCIE6 at x8)*

  – 15μ Gold Contact in VGA PCIe Slots

  *Supports NVMe SSD as boot disks
• Storage
  CPU:
  – 1 x Blazing M.2 Socket (M2_1, Key M), supports type 2260/2280/22110 PCIe Gen5x4 (128 Gb/s) mode*
  – 2 x MCIO Connectors (PCIe Gen5x4 or 4 x SATA3 6.0 Gb/s)
  – 1 x SlimSAS SFF-8654 Connector (SLIM1) (PCIe Gen4x4 or 4 x SATA3 6.0 Gb/s)
  Chipset:
  – 1 x Hyper M.2 Socket (M2_2, Key M), supports type 2260/2280 PCIe Gen4x4 (64 Gb/s) mode*
  – 1 x SlimSAS SFF-8654 Connector (SLIM2) (PCIe Gen4x4)
  – 4 x SATA3 6.0 Gb/s Connectors

  *Supports NVMe SSD as boot disks
• RAID
  – Supports RAID 0, RAID 1 and RAID 10 for SATA storage devices
  – Supports RAID 0, RAID 1 and RAID 10 for M.2 NVMe storage devices*

  *Requires additional M.2 NVMe expansion cards to support RAID 10
• USB
  CPU:
  – 2 x USB4 Type-C (Rear)
  – 4 x USB 3.2 Gen2 Type-A (Rear)
  Chipset:
  – 1 x USB 3.2 Gen2x2 Type-C (Front)
  – 4 x USB 3.2 Gen1 Type-A (2 Rear, 2 Front)
  – 4 x USB 2.0 (Front)

  *All USB ports support ESD Protection
• Connector
  – 2 x Thermistor Cable Headers
  – 1 x Front VGA Header
  – 1 x COM Port Header
  – 1 x Power LED and Speaker Header
  – 1 x Intelligent Platform Management Bus Header
  – 1 x PSU SMBus Header
  – 1 x BMC SMBus Header
  – 1 x Auxiliary Panel Header
  – 2 x Addressable LED Headers*
  – 1 x CPU Fan Connector (4-pin)**
  – 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan Speed Control)***
  – 3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan Speed Control)****
  – 1 x 24 pin ATX Power Connector (Hi-Density Power Connector)
  – 1 x 3 pin ATX Power Connector*****
  – 2 x 8 pin ATX 12V Power Connectors (Hi-Density Power Connector) (for Motherboard)******
  – 2 x 6 pin PCIe 12V Power Connectors (Hi-Density Power Connector) (for Motherboard)******
  – 2 x 6 pin Graphics 12V Power Connectors (Hi-Density Power Connector) (for PCIe card)*******
  – 1 x Right Angle Front Panel Audio Connector
  – 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
  – 1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports)
  – 1 x Front Panel Type C USB 3.2 Gen2x2 Header (20 Gb/s)
  – 2 x SGPIO Headers
  – 1 x CPU HP-SMBus Connector
  – 1 x Non Maskable Interrupt Button Header
  – 1 x Dr. Debug with LED
  – 1 x Power Button with LED
  – 1 x Reset Button with LED
  – 1 x Clear CMOS Button

  *Support in total up to 5V/3A, 15W LED Strip

  **CPU_FAN1 supports the fan power up to 1A (12W).

  ***CPU_FAN2/WP supports the fan power up to 2A (24W).

  ****CHA_FAN1~3/WP support the fan power up to 2A (24W).

  *****Plug the Multi PSU Adaptor Cable that comes with the package to ATX_CON1 if you use a secondary PSU.

  ******It is required to connect both ATX12V1 and ATX12V2; otherwise, the system may not boot up properly.
  It is required to connect all 8 pin and 6 pin 12V Power Connectors when overclocking.

  *******It is required to connect 6 pin PCIE 12V Power Cables to either GFX_12V1 or GFX_12V2; otherwise, the system may not boot up properly.

• Rear Panel I/O
  – 1 x DisplayPort 1.1a
  – 1 x Optical SPDIF Out Port
  – 2 x USB4 Type-C Ports (40 Gb/s)*
  – 4 x USB 3.2 Gen2 Type-A Ports (10 Gb/s)
  – 2 x USB 3.2 Gen1 Type-A Ports
  – 2 x RJ-45 LAN Ports
  – 1 x RJ45 Dedicated IPMI LAN Port
  – 1 x Line Out Jack (Gold Audio Jack)
  – 1 x Microphone Input Jack (Gold Audio Jack)

  *USB_TC1 supports USB PD 3.0 up to 9V@3A (27W) / 5V@3A (15W) charging; USB_TC2 supports USB PD 3.0 up to 5V@3A (15W) charging.
• Software and UEFI
  Software
  – ASRock Polychrome SYNC*
  UEFI
  – ASRock Full HD UEFI
  – ASRock Auto Driver Installer
  – ASRock Instant Flash

  *These utilities can be downloaded from ASRock Live Update & APP Shop.
• Accessories
  – 1 x User Manual
  – 1 x I/O Shield
  – 4 x SATA Data Cables
  – 2 x Thermistor Cables
  – 1 x Multi PSU Adaptor Cable
  – 2 x Screws for M.2 Sockets
  – 2 x Standoffs for M.2 Sockets
• Form Factor
  – EEB Form Factor: 12.0-in x 13.0-in, 30.5 cm x 33.0cm
  – 14 Layer PCB
  – 2oz Copper PCB
• OS
  – Microsoft Windows^® 11 64-bit
• Certifications
  – FCC, CE
  – ErP/EuP ready (ErP/EuP ready power supply is required)
  – CEC Tier II ready