Arctic Fan Bionix P140

Rp265.000

Categories: , , Tags: SKU: Arctic Fan Bionix P140

Description

OPTIMISED FOR STATIC PRESSURE

During the development of the new BioniX P140, special emphasis was placed on a focused airstream and thus a high static pressure.
The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P140 is particularly suitable for use on heatsinks and radiators.

MORE EFFICIENT TECHNOLOGY

The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new BioniX P140 to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

MAXIMUM QUIETNESS, MINIMUM VIBRATION

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

EXTENDED LIFE SPAN

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.

200 TO 1950 RPM REGULATED VIA PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX P140 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

HIGH QUALITY BEARING

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

TWO WAY INSTALLATION

TECHNICAL SPECIFICATIONS

General data
Performance
Fan Speed:
200 – 1950 rpm
Airflow:
77.6 CFM/ 131.92 m³/h
Static Pressure:
2,85 (mm/H2O)
Noise Level:
0.45 Sone
Fan
Fan Frame:
BioniX
Controll Type:
PST
Connector:
4-Pin-Connector + 4-Pin-Socket
Fan Bearing:
Fluid Dynamic Bearing
Electric Characteristics:
Typical Voltage:
12 V DC
Starting Voltage:
0 V
Current:
0.15 A
Cable Lenght:
400 mm
Size & Weight
Lenght:
140 mm
Width:
140 mm
Height:
28 mm
Weight:
181 g

Additional information

Weight 1 kg
Colour

Red, White

Reviews

There are no reviews yet.

Be the first to review “Arctic Fan Bionix P140”