Lian li Lancool II Mesh Peformance

Rp1.520.000

Description

LANCOOL II MESH Performance features a mesh front panel and mesh bottom left shroud panel,

honeycomb vent design and built-in PWM fans,

ensuring bountiful airflow delivered to your components while the system runs at peak performance.

SHOP NOW

THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE

  • Premium look
  • Unprecedented modularity
  • Hinged flip panels all around
  • Optimized cooling support
  • Cable management with ease
  • Optimized storage configuration

EXQUISITE STEEL CRAFTSMANSHIP

Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system, allowing it to run at peak performance.

MORE ADVANCED COOLING SUPPORT

The optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance PWM cooling fans.

HIGH-PERFORMANCE BUILT-IN PWM FANS

2 x 140mm PWM intake fans pre-installed at the front and 1 x 120mm exhaust fan in the back of the PERFORMANCE EDITION produce ample airflow, keeping your system running at peak performance.

EXPERIENCE FAN CONTROL ON A WHOLE NEW LEVEL

The four-mode fan controller on the top front allows you to experience fan control on a whole new level. Select L for casual use like internet browsing, press H when you’re pushing your GPU(s) and CPU hard.

Note!
The hub supports fans with either 3-PIN or 4-PIN header. However, if you intend to synchronize and control fan speed and noise level for the added fans via the fan controller, the added fans should have 4-PIN PWM headers.

MODULAR PSU SHROUD COVER

The space between the top and bottom chamber now features two removable PSU shroud covers to house either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.

Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.

When 2 fans are mounted, and the cover plates removed, ventilation efficiency is even better.

Even when 2 x SSDs are mounted, the vents on  the PSU shroud covers guarantee good ventilation.

MULTI-WAY FAN/RADIATOR BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.

HOW TO INSTALL THE MULTI-WAY FAN/RAD BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your need.

ATTENTION!
Do not install a 140/280MM radiator in the inner side of the bracket otherwise irreparable deformation might occur. The correct way to install is to mount fans first then place a radiator on top of the fans.

OPTIMIZED STORAGE CONFIGURATION

With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.

TOOLLESS SLIDING DRIVE CAGE
Slide the hard drive cage along its bottom track to the position that best fits your interior configuration.

DRIVE INSTALLATION GUIDE

SUPPORT UP TO 9 DRIVES

Modular drive cage: 3 x 3.5” HDDs/2.5” SSDs

Side-mounted SSD bays behind motherboard tray:
2 x 2.5” SSDs
Side-mounted SSD bays at the bottom right flip shroud:
2 x 2.5” SSDs

REMOVABLE TWO-WAY CABLE MANAGEMENT BAR

Flippable, flexible, multi-functional

FLIP PANELS AND SHROUDs ALL AROUND

The tempered glass side panels offer an unobstructed view to the interior configuration while the bottom shroud panels provide quick access to PSU/drive installation.

CABLE MANAGEMENT WITH EASE

The cover plates save users’ neck and fingers by concealing nearly all the wayward cables.

Underneath the top right cover plate is a mounting plate for a removable fan/LED hub.

MESH PANEL KIT

Mesh front panel is available for those LANCOOL II users craving to upgrade their system by swapping to a mesh front panel

SHOP NOW ON NEWEGG

OPTIONAL KIT

lan2-mesh-kit-01
LANCOOLII-1X 
Vertical GPU Kit
lan2-mesh-kit-02
LANCOOLII-3X 
Hot-swappable Back Plate
lan2-mesh-kit-03
LANCOOLII-4X 
3.1 Type C Cable
lan2-mesh-kit-04
GB-001X
Anti-sag GPU Bracket

DOWNLOADS

SPECIFICATIONS

Model LANCOOL II MESH PERFORMANCE
Dimensions (D) 478mm x (W) 229mm x (H) 494mm
Motherboard E-ATX(width: under 280mm)/ATX/M-ATX/ITX
PSU 210mm
Color black
Materials 0.8mm SGCC (exterior, MB tray, and most of the interior)4.0mm tempered glass (both sides)

1.0mm SGCC (interior)

Fan Support Front (multi-way fan/radiator bracket): 3 x 120mm or 2 x 140mmTop: 2 x 120/140mm

Rear: 1 x 120mm

Above PSU Chamber: 2 x 120mm

Radiator Front (multi-way fan/radiator bracket): 1 x 360/280/240mmTop: 1 x 240mm (aligned to the left)
VGA Length 384mm
CPU Clearance 176mm
Drive Behind MB Tray: 2 x 2.5″ SSDBehind the right flip panel: 2 x 2.5”SSD

Hard Drive Cage: 3 x 3.5″ HDD/2.5″ SSD

Above PSU Chamber: 2 x 2.5″ SSD

Slot 7
I/O Ports 1 x Fan speed control button1 x TRRS AUDIO

2 x USB 3.0

1 x USB 3.1 TYPEC (Optional)

Dust Filters 1 x Top (magnetic), 1 x Bottom (tray)
Incl Fans 2 x 140mm PWM Fan (front)
Rated Speed:600 ±200 (30% Duty)-1200RPM ±10%
Air Flow:60.56CFM
Noise:25.8dB(A)1x 120mm PWM fan (rear)
Rated Speed:600 ±200 (30% Duty)-1500RPM ±10%
Air Flow:54.6CFM
Noise:26.1dB(A)

Additional information

Weight 15 kg

Reviews

There are no reviews yet.

Be the first to review “Lian li Lancool II Mesh Peformance”