Description
Daisy-Chain Design
Better Performance
Multiple-lighting Combinations
L-Connect 2 Software
PWM ARGB Fan
Brushed aluminum trim
AVAILABLE IN TWO COLORS
White
Black
MODULARITY FAN
Simply daisy chain the fans together with the slide-in interlocking system to pass the signals through the pin-to-pad contact. Users can choose to go with a single fan or link up to 4 fans in a group, and operate each group with just 2 cables.
BETTER PERFORMANCE
Compared to UNI FAN SL120, AL120 has better performance in air flow(64.5 CFM), noise levels(17 ~ 28.3 dB) and static pressure(2.62 mmH2O).
ENDLESS LIGHTING EFFECT COMBINATIONS
The ARGB LEDs are located at the inner fan blade and the four corner edges of the fan frame.
Users can set both the fan blade lighting effects and the fan frame inner edge lighting effects separately, or go with the built-in combined lighting effects.
Option 1. Set the fan blade and inner fan frame lighting modes individually to achieve a custom look.
Option 2. Select the combining lighting mode
RAINBOW
STATIC COLOR
BREATHING COLOR
TAICHI
COLOR CYCLE
WARNING
VOICE
SPINNING TEACUPS
TORNADO
MIXING
STACK
STAGGERED
TIDE
SCAN
SCAN-SYNC
CONTEST
CONTEST-SYNC
L-CONNECT 2 SOFTWARE TO CONTROL AL120
Perfectly control and preview the lighting effect of the AL series with L-Connect 2 interface.
Note: For SL users, please install L-Connect & L-Connect 2 Guidebook and follow steps.
ADJUST THE SPEED OF EACH FAN GROUP
Perfectly control and preview the lighting effect of the AL series with L-Connect 2 interface.
Fan Speed: 800 RPM – 1900 RPM
Users can set the fan speed of each group of UNI FANs manually or set it at PWM to let the motherboard control the speed.
Note: Please set the fans at PWM mode in BIOS.
SET PERSONALIZED LED MODE AND COLOR
Designed for AL120, users can choose to set their personalized lighting effect through L-Connect 2. Thousands of combinations can be accomplished.
CONTROL UP TO 16 FANS IN ONE GO
The exclusive controller (UNI HUB) for the AL series that can connect up to 16 fans is included in the 3 pack.
Note: Do not use SL controller for AL120
MANAGE UP TO 64 FANS
L-Connect 2 can now manage a maximum of 4 controllers at a time, allowing users to control 64 fans within the software.
DAZZLING AT ALL ANGLES
Brushed aluminum trim with reflecting edges on both sides of the fan frame.
Rear metallic medallion at the center with cables hidden in X-style fan support.
Aesthetic details considered for both intake and outtake mounting in the case.
AVAILABLE IN TWO KINDS OF PACKAGING
3 Pack
Single Pack
NOTE
To fully control up to 16 UNI FAN (4 fans each cluster) in one go either through the built-in L-Connect2 software or the motherboard software, users must use the designated UNI FAN controller included in the AL120 3 pack . Please note that the single pack version does not contain this controller and thus we recommend users to purchase at least one AL120 3 pack for their build.
NOTE
“UNI HUB” requires the PWM signal while performing PWM mode on L-Connect2. Please enter your MB BIOS and check the fan header is at PWM mode. DC mode or any other mode will not be detected by the UNI HUB.
**Update your MB BIOS system if necessary.
Please note that below radiators are known not compatible with UNI FAN.
1.ARCTIC Liquid Freezer II Series
2.CORSAIR iCUE H115i RGB PRO XT Liquid CPU Cooler
3.CORSAIR Hydro Series™ H110i GT 280mm Extreme Performance Liquid CPU Cooler
Please check the rules to see if UNI FAN can be assembled on a specific radiator.
Rule 1. The tubes of the radiator must avoid the tenon of the UNI FAN and be at the safe area, which is in grey at above picture.
Rule 2. The screw holes between the two fans must be 15mm width on the radiator for either 120mm or 140mm UNI FAN.
SPECIFICATIONS
| PRODUCT NAME | UNI FAN AL120 | |||
|---|---|---|---|---|
| MODEL | AL120-3B | AL120-1B | AL120-3W | AL120-1W |
| COLOR | Black | White | ||
| NUMBER OF FANS | 3 | 1 | 3 | 1 |
| CONTROLLER | Yes | No | Yes | No |
| MATERIAL | PBT/PC/Aluminum | |||
| FAN DIMENSION | 120 X 120 X 25mm | |||
| RATED VOLTAGE | DC 12V (FAN) & 5V (LED) | |||
| FAN SPEED | 800~1900 RPM | |||
| AIR PRESSURE | 2.62 mmH2O (Maximum) | |||
| AIRFLOW | 64.5 CFM (Maximum) | |||
| ACOUSTIC NOISE | 17 ~ 28.3 dB | |||
| LOCKED CURRENT | >= 50mA | |||
| BEARING TYPE | Fluid Dynamic Bearing (FDB) | |||
| OPERATION VOLTAGE | DC 12V & 5V | |||
| START-UP VOLTAGE | DC 6.0V | |||
| INPUT CURRENT | 0.22A(FAN) / 0.66A (LED) | |||
| INPUT POWER | 5.94Watt | |||
| WARRANTY | 2 years | |||
Additional information
| Weight | 1 kg |
|---|---|
| Colour | Black, White |
You must be logged in to post a review.
Reviews
There are no reviews yet.