|Model||CARDEA ZERO Z440|
|Interface||PCIe Gen4 x4 with NVMe 1.3|
|Capacity||1TB / 2TB|
|Operation Temperature||0˚C ~ 70˚C|
|Storage Temperature||-40˚C ~ 85˚C|
|Terabyte Written||1TB / >1,800TB
2TB / >3,600TB
|Performance||Crystal Disk Mark:
1TB Read/Write: up to 5,000/4,400 MB/s
2TB Read/Write: up to 5,000/4,400 MB/s
1TB Read/Write: 750K/750K IOPS Max
2TB Read/Write: 750K/750K IOPS Max
|Dimensions||80.0(L) x 22.0(W) x 3.7(H) mm|
|Humidity||RH 90% under 40°C (operational)|
|Operating System||System Requirements:
|Warranty||5-year limited warranty|
 This product is compatible with Intel and AMD platforms, and the performance result is tested on a motherboard that supports PCIe 4.0 interface by the T-FORCE internal laboratory. The actual speed may vary depending on the software and hardware conditions of the platform.
 The experimental data is based on T-FORCE internal laboratory’s test result. Under the same condition, the temperature test data is according to the comparison of the non-heat spreader M.2 PCIe Gen4 x4 SSD and the T-FORCE CARDEA ZERO Z440 Solid State Drive. The relevant test environment is simulated under a fanless environment using mask. The actual speed may vary depending on the software and hardware conditions of the platform.
 1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes/1024/1024/1024 = 0.93GB
 Definition and conditions of TBW (Terabytes Written)are based on JEDEC standard
 PCIe SSD works best under WIN8.1 and WIN10 operating system. Windows Operating Systems earlier than Windows 8.1 does not support NVMe Driver natively. Users will need to install NVMe Driver prior installing the SSD.
 The SSD is based on the TBW or Warranty period.
- All the test data is provided by TEAMGROUP’s laboratory and the information of test data is only for reference.
- We reserve the right to modify product specifications without prior notice.
- M.2 SSD Installation Instructions
The aesthetic of thinness – releasing the ultimate performance
Z440 uses the latest and fastest PCIe Gen4x4 interface and complies with the NVMe 1.3 standard. With <1mm thin of graphene copper foil, the sequential read/write speed is up to 5,000/4,400 MB/s. In addition, T-FORCE’s exclusive totem patterns let gamers enjoy the ultimate aesthetics of both outside and inside.
3D NAND + PCIe4.0 – capacity and performance progress greatly
The 3D flash memory is stacked in a three-dimensional way to offer up to 1TB/2TB of large storage.
In addition, it is downward compatible with the PCIe 3.0 platform, comprehensively improving gamer’s gaming experience and satisfying the demand for various large-scale data computing tasks.
Well-proportioned – transfer heat source together
The <1mm thin graphene copper foil thermal conductive heat spreader can effectively eliminate both waste heat and device interference during installation. It can be installed on all major motherboard and M.2 slots. Even without the cooling module of the motherboard, it can still transfer heat source effectively, allowing gamers to enjoy high-speed performance.
Three heat dissipation elements – the combination of graphene and copper can provide excellent heat dissipation
After T-FORCE’s long-term and rigorous internal laboratory tests and burn-in test, the patented graphene copper foil thermal conductive material has been developed and is able to provide more than 9% of cooling effect during actual continuous reading/writing for over 3 hours. Thermal conduction (graphene), thermal radiation (graphene) and thermal capacity (copper), these three elements can perfectly showcase an excellent heat dissipation performance.
Smart management technology – trustworthy reliability
The built-in smart algorithm management mechanism has functions such as GC (garbage collection), TRIM command, LDPC (Low Density Parity Check Code) error correction mechanism, E2E Data Protection, etc. which are able to help in operation efficiency, prolong the service life of the SSD, while also allowing gamers to ensure data security, maximize its performance and the stability of data transfer.
T-FORCE is TEAM force. The red “T” on the logo of “TF” represents TEAMGROUP’s passion for the storage products. The black “F” represents TEAMGROUP’s over 18 years of promotion of storage products. The visual design of the perfect combination elegantly symbolizes a pair of flying wings. They represent that the high quality and extreme performance gaming products from TEAMGROUP are capable of allowing all gamers to break the speed limit and enjoy the ever-changing world of gaming.