|Interface||PCIe 3.0 x4 with NVMe 1.3|
|Capacity||256GB / 512GB / 1TB|
|Operation Temperature||0˚C ~ 70˚C|
|Storage Temperature||-40˚C ~ 85˚C|
|Terabyte Written||256GB / 380 TB
512GB / 800 TB
1TB / 1,665TB
|Performance||Crystal Disk Mark:
256GB Read/Write: up to 3,000/1,000 MB/s
512GB Read/Write: up to 3,400/2,000 MB/s
1TB Read/Write: up to 3,400/3,000 MB/s
256GB Read/Write: 200K/200K IOPS Max
512GB Read/Write: 350K/300K IOPS Max
1TB Read/Write: 450K/400K IOPS Max
|Dimensions||80.1(L) x 23.4(W) x 12.9(H) mm|
|Humidity||RH 90% under 40°C (operational)|
|Operating System||1. System Requirements:
2. This product has a heat sink, recommended the use of desktop only.
|Warranty||5-year limited warranty|
 Transmission speed will vary according to different hardware/software conditions, therefore the data can only used for basic reference.
 1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes/1024/1024/1024 = 0.93GB
 Definition and conditions of TBW (Terabytes Written)are based on JEDEC standard
 PCIe SSD works best under WIN8.1 and WIN10 operating system. Windows Operating Systems earlier than Windows 8.1 does not support NVMe Driver natively. Users will need to install NVMe Driver prior installing the SSD.NOTES
- All the test data is provided by TEAMGROUP’s laboratory and the information of test data is only for reference.
- We reserve the right to modify product specifications without prior notice.
- M.2 SSD Installation Instructions
PCIe Gen3 SSD – A great leap forward in performance!
It supports the new generation PCIe Gen3 x4 high-speed interface and the latest NVMe1.3 protocol. The outstanding performance of sequential read/write speed is up to 3400/3000 MB/s, and the random read/write speed is up to 450K/400K IOPS. It is able to deliver the smoothest high-speed performance without any lag even reading/writing large amounts of game data, complex 3D graphics and motion processing algorithms with fancy special effects.
Patent module increases radiating performance by 15%
Using Team Group’s cooling module with patent gaming fin type design, it allows natural convection or forced air cooling (e.g. fan) to enhance radiating. After long and rigorous internal laboratory tests and burn-in test, it was proven that it can be cooled down about 30℃ in an open space, and 10℃ in a closed space. This offers a more stable performance and prolongs the service life of SSD effectively.
Superconductivity – Instantaneous heat transfer
We introduce the super conductive thermal adhesive that is researched and produced by Canada. It has a higher cooling coefficient than ice, which has a K value of 2. The radiating performance of SSD can be pushed to the extreme with instantaneous heat transfer.
K value is used to represent thermal conductivity. The greater the K value is, the more heat transfers. For example, the K value of water is 0.6, and the K value of ice is 2.
NVMe – No more lag
The T-FORCE M.2 PCIe SSD – CARDEA II supports the latest NVMe 1.3 protocol. The system communicates with it through PCIe bus and connects to the built-in PCIe controller of the chipset or processor, so the signal transfer is as simple and precise as point to point. The T-FORCE M.2 PCIe SSD – CARDEA II offers you a pleasant high-performance transfer experience, without a bit of lag or delay.
Transfer speed is 5 times higher than the SATA III interface
It supports the latest NVMe 1.3 protocol. The system communicates with it through the PCIe bus and connects to the built-in PCIe controller of the chipset or processor, so the signal transfer is as simple and precise as point to point. Gamers can enjoy the performance without a bit of lag or delay.
Smart technology – Dependable reliability
T-FORCE M.2 PCIe SSD – CARDEA II supports S.M.A.R.T function and its built-in smart algorithm management mechanism has functions such as GC (garbage collection) and TRIM command which are able to ensure operation efficiency, prolong the service life of the SSD and bring it to its maximum performance. Meanwhile, the powerful Wear-Leveling technology and ECC (Error Correction Code) function improve the accuracy and reliability of data transfer.
T-FORCE is TEAM force. The red “T” on the logo of “TF” represents TEAMGROUP’s passion for the storage products. The black “F” represents TEAMGROUP’s over 18 years of promotion of storage products. The visual design of the perfect combination elegantly symbolizes a pair of flying wings. They represent that the high quality and extreme performance gaming products from TEAMGROUP are capable of allowing all gamers to break the speed limit and enjoy the ever-changing world of gaming.